Home All Specifications Painting (Concrete)

PAINTING (CONCRETE)


1. Remove all loose/flaking paint by power-washing exposed surfaces (where possible) and/or scraping the surface to achieve a solid substrate, free from loose material.

2. If spalled or delaminated concrete is found, report on condition to owner or his representative for his for his direction for repair, if not covered under Scope of Work. Open cracks or fissures must be sealed prior to coating applications and are subject to a per foot cost noted under the Bid Section, under rout & seal).

3. Apply one coat of concrete primer to surfaces to be painted.

4. Apply one coat of acrylic latex paint (breathable) or other suitable coating if chosen by the owner for application. Colour and coating type to be chosen by owner.

5. If required, taping of adjoining surfaces will be done to ensure a clean, tapered line of distinction in the surfaces, where colours differ from the one applied or any other reason, which would detract from an aesthetically pleasing finished product.